PROJ-FILE-FMT=2
PROJ-DRIVER-NAME='Canon Realis SX50 (Rev B).prjdrv'
PROJ-NAME='Canon Realis SX50'
PROJ-DRIVER-REV='Rev B'
IR-TIME-0L=550u
IR-TIME-0H=550u
IR-TIME-1L=1.69m
IR-TIME-1H=550u
PROJ-BAUD-RATE=19200,8,N,2
IRCODE['_REPEAT']=""
IRCODE['_PREFIX']=""
IRCODE['_SUFFIX']=""
IRCODE['^DELAY']="d5m,d5m",REPEATS=1

; No material changes from Rev A, incremented revision for Application Note format update -- BT

DOC-INSTALLATION-NOTE[1]="The Canon Realis SX50 projector will not respond to most of its own controls while it is powered on and under SmartPanel control. The projector will not respond to its settop controls, except POWER OFF. This is due to the projector design. Please read the Application Note for more information, or contact SP Controls Technical Support."


; power
RSCODE['POWER ON']="'REMOTE',13,D500m,'POWER ON',13",REPEATS=1

; Power On sets the projector to REMOTE mode, or else the projector would not respond to RS-232 mode. While in REMOTE mode, the projector will not repsond to its own settop controls, except for POWER OFF. Once the projector is powered off by any means, it will automatically exit REMOTE mode for its normal LOCAL mode. BT

RSCODE['POWER OFF']="'POWER OFF',13",REPEATS=1
RSCODE['_POWER POLL']="'CR0',13,10",REPEATS=1

; volume
RSCODE['VOL ABS']="'AVol=',&VASC2,13"


; source 
RSCODE['D-RGB']="'INPUT=D-RGB',13",REPEATS=1,IS-SELECTION
RSCODE['A-RGB1']="'INPUT=A-RGB1',13",REPEATS=1,IS-SELECTION
RSCODE['A-RGB2']="'INPUT=A-RGB2',13",REPEATS=1,IS-SELECTION
RSCODE['COMP VID']="'INPUT=COMP',13",REPEATS=1,IS-SELECTION
RSCODE['VIDEO']="'INPUT=VIDEO',13",REPEATS=1,IS-SELECTION
RSCODE['S-VIDEO']="'INPUT=S-VIDEO',13",REPEATS=1,IS-SELECTION

; hidden functions
RSCODE['AUTO PC']="'AUTOPC',13",REPEATS=1,IS-HIDDEN
RSCODE['MUTE ON']="'MUTE=ON',13",REPEATS=1,IS-HIDDEN
RSCODE['MUTE OFF']="'MUTE=OFF',13",REPEATS=1,IS-HIDDEN

BYTES-TO-QUEUE=2
POWER-POLL-INTERVAL=5.17s
POWER-POLL-TIMEOUT=940m
POWER-POLL-THRESHOLD=3
POWER-POLL-STARTBYTE=1
POWER-POLL-MATCH-ANY=False
POWER-POLL-MATCH-BYTES="'00'"
POWER-POLL-TESTBYTE-MASK=255
POWER-POLL-DURING-WARMUP=False
POWER-POLL-DURING-LOCKOUT=False
POWER-POLL-LOCKOUT=1.598M
PROJ-USES-ABSOLUTE-VOL=True
VOL-MUTE=0
VOL-RANGE=20
VOL-FLOOR=0
IO-DOWNTIME=58m
WARM-UP-DELAY=40s
POWER-ON-DELAY=35s
IO-CANCEL-DOWNTIME-ON-RX=False
USE-MODULATION-WHEN-WIRED=False
INVERT-LINE-WHEN-WIRED=True
CARRIER-PERIOD=25.8u
CARRIER-DUTY-CYCLE=50
PROJ-MISSING-THRESHOLD=5
DEFAULT-CORE-FUNCT[REPEAT]='_REPEAT'
DEFAULT-CORE-FUNCT[PREFIX]='_PREFIX'
DEFAULT-CORE-FUNCT[SUFFIX]='_SUFFIX'
DEFAULT-CORE-FUNCT[POLL]='_POWER POLL'
DEFAULT-CORE-FUNCT[ON]='POWER ON'
DEFAULT-CORE-FUNCT[OFF]='POWER OFF'
DEFAULT-CORE-FUNCT[VUP]='VOL ABS'
DEFAULT-CORE-FUNCT[VDN]='VOL ABS'
DEFAULT-SELECTION[1]='VIDEO'
DEFAULT-SELECTION[2]='S-VIDEO'
DEFAULT-SELECTION[3]='A-RGB1'
DEFAULT-SELECTION[4]='A-RGB2'
DEFAULT-HID-FUNCT[OFF]=''
DEFAULT-HID-FUNCT[VUP]=''
DEFAULT-HID-FUNCT[VDN]=''
DEFAULT-HID-FUNCT[1]='AUTO PC'
DEFAULT-HID-FUNCT[2]='MUTE ON'
DEFAULT-HID-FUNCT[3]='MUTE OFF'
DEFAULT-HID-FUNCT[4]=''
DEFAULT-LOCKOUT=75s
POWER-SENSE-OPTIONS=None,Sensor
IR-WIRING-OPTIONS=
PASSIVE-MODE=False